Details

Philips Agilent Viridia M3 Features The color display has a wide viewing angle, and excellent visibility from a distance, so you can easily recognize and see the data you need for decision making. For applications where a larger display is required, an additional display can be connected to the monitor via the standard VGA output. The Philips Agilent Viridia M3 patient monitor is designed for use by clinicians for adult, pediatric and neonatal patients in Critical and Intermediate Care areas, in Operating Rooms and General Wards, and for transport inside and outside the hospital. Portable Wireless Networked monitor EASI™-derived 12-lead ECG4 using a 5-electrode cable set Multi-lead Arrhythmia Up to 3 channels of ECG with basic Arrhythmia and ST Analysis capability FAST-SpO2 measurement, using Fourier Artifact Suppression Technology, for accurate performance even with low perfusion Respiration, Non-invasive and Invasive Blood Pressure, and Temperature measurements Mainstream or Sidestream CO2, a second Invasive Blood Pressure and Temperature measurements, and enhanced Arrhythmia capability, available optionally Philips Agilent Viridia M3 Specifications Dimensions Size (W×D×H) Without Handle: 210mm × 135mm × 210mm (8.27" × 5.31" × 8.27") Weight Without battery: 3200 g (7.05 lb.) Display: 6.5" (diagonal) active color LCD (TFT) Resolution: 640 × 480 pixels VGA Interface Refresh rate: 60 Hz Horizontal frequency: 31.5 kHz Resolution: 640 x 480 pixels Video Signal: 0.7 Vpp @ 75 Ohm HSYNC/VSYNC signal type: TTL Connector: 15-pin D-SUB Power 100 to 240VAC, 50/60Hz 0.4 to 0.7A