Details

Olympus PSD 30 Features The Olympus PSD-30 has been designed specifically for electrosurgery through flexible endoscopes and combines advanced cutting & coagulation capability with enhanced safety features. Optimum settings can be quickly selected for both cutting and coagulation output. Three cutting modes allow optimal cutting and haemostasis Pure: Designed for quick cutting Blend 1: Designed for moderate cutting and haemostasis Blend 2: Designed for cutting with strong coagulation capability Three coagulation modes provide optimal haemostatic effect Forced: Designed for comparatively strong coagulation and haemostasis Soft: Designed to stop light bleeding - very little tissue carbonization occurs in this mode, so it can be used mark tissue using a snare Auto Stop: Designed to reduce tissue carbonization and invasion. Output is automatically stopped when a certain degree of coagulation has been reached during ’Soft’ mode coagulation Olympus PSD 30 Specifications Dimensions Dimensions 295 mm (W) × 160 mm (H) × 420 mm (L) Weight 7.8 kg Power Voltage 220, 230, 240 V Frequency 50/60 Hz Input current 2 A Voltage fluctuation Within ±10% Fuse rating 3.15 A, 250 V Fuse size 5.0 × 20 mm Output Types Cut modes: 3 modes (PURE, BLEND1, BLEND2) Coagulation modes: 3 modes (SOFT, AUTO STOP, FORCED) The AUTO STOP output uses an identical waveform to SOFT and is provided with the auto stop function Max Output PURE: 50 W BLEND1: 50 W BLEND2: 50 W SOFT: 50 W AUTO STOP: 50 W FORCED: 50 W (Rated load resistance 300 Ω, SOFT, AUTO STOP: 100 Ω) Output Time 10 seconds ON and 30 seconds OFF output (to continue the output, keep the output time below 10 seconds) Safety Fuctions Patient / S-Cord The function detects improper connections of cords and broken wires in the patient plate and S-cord. It activates the following functions if irregularities are detected: Patient/S-cord warning indicator will light or flash. If the above condition continues for a while, an alarm will sound and high frequency will stop. (When using an endoscope without S-cord, an alarm will sound and the high-frequency output will stop immediately.)) High Frequency Output Monitor The function detects whether the output level is in accordance with the output setting. It activates the following functions if irregularities are detected: High frequency output warning indicator will light An alarm will sound Output will be prevented Output Time Monitor The function detects the high frequency output time. It activates the following functions if continuous output time exceeds the specified time: Output time warning Indicator will flash after 15 seconds of continuous output. If output continues for 15 more seconds (i.e. 30 seconds continuous output), the output time warning indicator will light constantly, the warning alarm will sound (in 5-second intervals), and output will be prevented. Foot Switch Monitor The function detects short-circuit of the foot switch. It activates the following functions if a short-circuit is detected: The alarm display on the output setting indicator will flash An alarm will sound Change of setting will be prevented Output will be prevented