Details

NAI DiCOM Box Ca Features Add network connectivity to virtually any video-based imaging system. The DiCOM box CA Video to DiCOM solution provides “off the shelf” connectivity for a variety of network applications such as Print and Archive Servers via the DiCOM 3.0 standard. Ideal for creating flexible and scalable print networks or tying various modalities into PACS, teleradiology networks and RIS interface via Modality Worklist. DiCOM Print, DiCOM Store. Modality Worklist Modality Performed Procedure Step (MPPS) Storage Commitment. Multi-Modality compatible with over 250 models. Host video rates up to 20MHz pixel rate. High line rate configurations available. Interlaced or non-interlaced video input. NAI DiCOM Box Ca Features DiCOM Service Classes DiCOM Print Optional DiCOM Store Optional DiCOM Modality Worklist Optional DiCOM MPPS Optional DiCOM Storage Commitment Standard Video Input (Terminated, 75 ohms) Monochrome composite video into Green input Red, Green, Blue (RGB) and composite sync (Can be configured for sync on Green and seperate sync) Nominal 525/625 lines 30/25 fps Interlaced or non-interlaced Pixel Clock Minimum: 7 MHz Pixel Clock Max: 20 MHz / Low Line Rate 150 MHz High Rate Video Acquisition Up to 768 x 580, 20Mhz, 8 bit Single Frame Color Capture 24 bit color (16,777,216 colors) Internal Storage Network Connectors 2.2GB or greater Hard Drive Ethernet 10/100 base T - selectable Video I/O High Density DB15, Female pins Network: 8 pin modular jack (RJ45) Operator Interface Keypad; DB9, Male pins Host Control Input: DB9, Male pins Remote Capture Input: BNC, Female pins Power Input Module 115-230 Volts, +/- 15% 47-63 Hz, 120 VA Height: 3.25 inches (8.25 cm) Width: 10.125 inches (25.72 cm) Depth: 14.125 inches (35.88 cm) Weight: 8 pounds (3.68 kg) Keypad Height: 7.15 inches (18.16 cm) Width: 4.10 inches (10.41 cm) Depth: 0.95 inches (2.41 cm) Weight: 8 ounces, (227g) Environmental Operating Temperature: + 50°F to +104°F, (+10°C +40°C) Barometric pressure: 700 hPa to 1060 hPa Relative Humidity: 5% to 80% non condensing Tansit Temperature: + 14°F to +122°F, (+10°C +50°C) Relative Humidity: 5% to 85% non condensing Clearance Requirements 3 inches (7.6cm) for rear panel cable connection Do not obstruct ventilation airflow at front and rear of module Classification IEC601 Class I Type B ordinary equipment Continuous operation Agency Approvals UL 60601-1 CAN/CSA C22.2 NO. 601.1-M90 EN 60601-1-2 Class B Group 1 FCC part 15 Optional High Line Video Input 150 MHz / High Line Rate Image Image Matrix Max: 2048 x 1024 Optional High Line Capture Up to 2048 x 1024, 150MHz, 8 bt mono, 24 bit color