Details

Hospira Plum 360 Features With today’s hectic pace, tight budgets and patient safety concerns, you need an infusion pump that serves both you and your patients, helping to maximize valuable resources and enhance your clinical practice. You’ll find the Plum 360 infusion system is unlike any other, with a unique combination of features that empowers you to deliver optimal healthcare – today and tomorrow. Air Matters — the Plum 360 utilizes the unique PlumSet™ cassette that features air management that doesn’t require disconnecting from the patient Remove air faster — use the pump to automatically remove air through the cassette’s secondary administration port without disconnecting the line from the patient Reduce therapy interruptions — capture 1 mL of air in the cassette’s air trap – an industry exclusive feature – before the alarm is activated Reduce risk of contamination — Help eliminate the potential for contaminants by keeping the patient line connected Secondary Delivery is of Primary Importance — Hospira’s Plum infusion systems are unique in the way they connect the secondary line directly to the PlumSet cassette, so the pump can differentiate between primary and secondary infusion lines and deliver each as intended Optimize Safety and Compliance at the Point of Care — when programming your Plum 360 infusion system with Hospira MedNet™ software, you automatically start in the drug library EMR Ready, Today and Tomorrow — when you and your electronic medical record (EMR) partner are ready for integration, your Plum 360 infusion system with Hospira MedNet safety software is ready too. Whether it’s today, or any time after, Hospira’s IV Clinical Integration solution will connect your Plum 360 system to the medication order, patient information and EMR Hospira Plum 360 Specifications Dimensions Dimensions Approx. 8” H x 8” W x 6” D (0.20 m H x 0.20 m W x 0.15 m), excluding pole clamp extrusion and power cord storage Weight Approx. 10 lbs. (4.5 kg) with battery Power Battery Life Approx. 3 hours at up to 125 mL/hr on a single line, or delivers at least 250 mL if > 126 mL/hr Power Requirements 120 V~, 50 to 60 Hz, 50 VA Recharge Time Approx. 8 hours with the device operating at 125 mL/hr on one line Delivery Rates Lines A and B: 0.1 to 99.9 mL/hr (in 0.1 mL increments), 100 to 999 mL/hr (in 1 mL increments) Concurrent Delivery: 0.5 mL/hr minimum for each line PlumSet: 500 mL/hr cumulative (A+B) maximum KVO: 1.0 mL/hr or the last delivery rate on the associated line, whichever is less Delivery Rate Accuracy ± 5% (1 to 999 mL/hr), ± 10% (0.1 to 0.9 mL/hr) Delivery Units mL/hr, mcg/kg/min, mcg/min, mcg/kg/hr, mg/min, mg/m2, mg/m2/min, mg/ m2/hr, mg/kg, mg/kg/hr, mg/hr, ng/kg/min, g/hr, mEq/hr, mUn/min, units/ min, units/hr, units/kg/hr General Pump Line Plum 360™ Pump Type General Infusion Volume Range 0.1 to 99.9 mL (in 0.1 mL increments), 100 to 9999 mL (in 1 mL increments) System Alarms Occlusion, Air-in-Line, Low Battery, Door Opened While Pumping, Lockout Violation, VTBI Complete, Valve/Cassette Test Failure, Nurse Call, No Action, Programming Not Complete Occlusion Alarm Pressure Distal Pressure Limit (without alarm): 1-15 psig (default 6 psig)