Details

CSZ Hemotherm 400MR Features The CSZ HEMOTHERM Model 400MR Cooler/Heater system is used to lower/raise the blood temperature and/or maintain blood temperature, as required, through conductive heat transfer. The conductive heat transfer is accomplished through any type of Blood Oxygenator/Heat Exchanger unit, along with the use of a blanket under the patient for the re-warming phase, if desired. Efficient Heating/Cooling: Dual reservoirs double your efficiency. Independent cooling and heating reservoirs permit instant changeover from one bath to the other. Each reservoir has its own control mechanism and temperature display. The efficient pump produces a flow rate higher than any competitor’s units. The Hemotherm® lowers reservoir water temperatures at a rate that rapidly produces a significant reduction in blood temperature. Patient Safety: Built-in secondary Hi and Lo safety thermostats and an external circuit breaker which can be reset to enhance the safe design of Hemotherm®. Convenient: Ice is not required with this system, eliminating mess and providing simple setup. For additional convenience an optional remote control is available to change and monitor settings of the Hemotherm® from a remote location. Microprocessor control provides easier, more accurate operation. Large LED readout allows monitoring at a glance. Eliminates need for calibration. Ease of Use: Mechanical refrigeration means easy set-up, quick response, and minimum clean up. Eliminates preconditioning process. Hemotherm® takes up just 3.4 sq. ft (0.3 sq. m) of floor space and moves easily on conductive swivel casters. Dual Purpose: The Hemotherm® may also be used with a hyper/hypothermia blanket to provide additional patient cooling/re-warming therapy CSZ Hemotherm 400MR Specifications General Water Temperature 3° - 42°C (37.4° - 107.6°F) Flow Rate 246 GPH (flow-through Hansen fittings) Exterior Dimensions 22in X 22in X 32in (55.8cm x 55.8cm x 81.3)