The Universal 12-Channel ECG turns an off-the-shelf computer into a full-functioning ECG. Connect the Universal ECG to a Personal Computer, laptop or tablet to acquire, store and analyze up to 12-channels of high-resolution ECG data. Perform resting ECG anytime, anywhere, with unparalleled ease-of-use. Features and Benefits Incomparable Accuracy - The Universal ECG uses the Louvaine analysis program. The Louvaine algorithm had the best total accuracy of the 9 popular algorithms compared by cardiologists to a standardized database of ECG tracings. Multiple Report Options - Office Medic offers multiple options for viewing the Universal ECG reports and they are transferable to PDF, JPEG, or TIFF formats 3 x 4 Simultaneous 3 x 4 Sequential 6 x 2 ECG 6 x 1 ECG Averaged Complexes Measurements Report Avg. Zoom Report Zoom Report Lightweight & Portable - The Universal ECG weighs less than 12 ounces and can easily be transported to new patient rooms, clinic locations or any off site location where an ECG needs to be performed. Also, no batteries are required for the Universal ECG because it draws its power from the computer (connected via USB port). Why Perform Diagnostic ECG Tests? - ECG testing has increased the diagnosis of heart disease. ECG's provide physicians a baseline to compare the health of a heart on a recurring basis. They also help diagnose, monitor and treat patients with symptoms of heart health issues.
Materials Included Universal 12-Channel ECG (100) ECG Tab Electrodes (10) Snap & Tab Adapters Office Medic Software Lead Placement Guide
Technical Specifications Hub Weight: 250-335 grams (depending on cables) Hub Dimensions: 85 mm x 91 mm x 20 mm (3.3” x 3.6” x .8”) Patient Leads Length Limb Leads: 1 meter Chest Leads: 0.6 meter Patient Leads: 12-Lead Cable (10 Patient Leads) Case Material: ABS Plastic Electrode Connection: 4 mm Banana plug with “snap” or “tab” connectors Display & Operating Console: Dependent on PC Gain Sensitivity: 5, 10, 20 mm/mV Speed: 12.5, 25 and 50 mm/s Input Range: ±6 mV Acquisition Sample Rate: 1000 samples/sec. (Compressed to 500 Hz with peak picking and averaging algorithm) Heart Rate Range: 30 – 170 bpm Frequency Response: 0.05 – 175 Hz ±3dB Defibrillation Protection: Patient leads are isolated from system and operator, with 4kV protection Common Mode Rejection: -60dB (minimum) Safety Standards: Complies with AAMI EC11, EN60601-1, EN60601-2, EN60601-2-25 Leads Off Indicators: Connection status for each lead is shown on Acquisition screen Power Source: PC, powered from USB interface Supply Voltage: 4-16 V DC Supply Current: < 17 mA DC Permanent Filters: High Pass: 0.05 Hz 1st order; Low Pass: 170 Hz 1st order Baseline Wander: Baseline reset by adaptive zeroing algorithm Notch filter (Mains Noise Rejection) 50 Hz 4th order Butterworth, 49.1 Hz – 50.9 Hz 60 Hz 4th order Butterworth, 59.1 Hz – 60.9 Hz Low Pass (Muscle Artifact Filter): 35 Hz 4th order Interpretation: Rhythm, Morphology Environmental Conditions: Operating Temperature: 0-40°C Storage Conditions: -20-70°C Humidity: 85% Max. (non-condensing)